The Conquistador joined the Tesoro lineup only one year ago, but it has made quite an impression. It was the first Tesoro detector to have a frequency shifter. Both relic hunters and competition hunters immediately fell in love with the unit. The detector's versatility proved to be the match for some of the toughest conditions in the world.
The Conquistador µMax uses our latest technology to make the Conquistador a little better. First we used our latest microprocessor controlled PCB. The microprocessor controls the audio tone, frequency shift and the battery test for the Conquistador µMax. The mode switch has been changed to include the switchable battery test. We have also added a VCO all metal pinpointing feature. The most noticeable change is that the Frequency shift switch has been moved up to the front of the faceplate. The "trigger switch" on the original Conquistador was great if you were right handed, but lefties had a bit of a problem with the placement. The Conquistador will come standard with the 9x8 coil and will have our latest plastic faceplate.
FEATURES:
- MicroMAX Design
- Built-in Mineral Rejection
- VLF 10 kHz Frequency
- One Drop-in 9 volt Battery
- No-Motion All Metal Mode
- Variable Threshold
- 3-Piece Knockdown Pole
- Silent Search Discriminate Mode
- Low Noise Circuitry
- Frequency Shifter
- 9 x 8 Coil
- Lifetime Warranty
SPECIFICATIONS
- Operating Frequency - 10.6 kHz, 10.4 kHz, 10.2 kHz
- Searchcoil Type - Concentric
- Searchcoil Size - 9 x 8
- Cable Length - Approx. 3’Audio
- Frequency - Approx. 630 Hz
- Audio Output - 1½” speaker and headphone jack
- Headphone Compatibility - ¼” stereo plug
- Weight (may vary slightly) - 2.2 lbs.Battery
- Requirement - One 9 volt DC (alkaline)
- Battery Life (typical) - 10 to 20 hours
- Optimum Temperature Range - 30° to 100° F
- Optimum Humidity - 0 to 75% R.H.
- Operating Modes - No Motion, All Metal, Silent Search Discriminate
|
